This is the frame with all the stuff cut off from the
back. It's pretty hard to make
out the details. The frame is sitting on the front wheel, and on a stuffed milk carton.
The wiring harness is hanging over the front part. All the rear part of the frame has been cut
off except the swing arm. I guess it might have been a plan to wash this frame first.
The ends of the swing arm have been removed, 4" spacer
tubes have been added,
and the axle plates have been welded back in. The square tube is there to space
the two axle plates at 8 1/2" apart, and to hold them parallel.